Discussion post reply starters, sorted by what your reply does
Maintained by Maksym Shevchuk, who runs PeerReply. Drafted with AI from the sources linked on this page. Updated .
Choose a discussion post reply starter by what your reply does: build on an idea, partly agree, add a source, connect your experience or ask a question. Fill the starter with a detail from your classmate’s post, then finish the sentence with your own reason. A starter with nothing specific after it reads like “Great post.”
What is a discussion post reply starter?
A discussion post reply starter is the opening phrase of a reply to a classmate, chosen for what the reply will do: build on an idea, question it, add evidence, connect your experience or ask something. A starter such as “One exception I can think of is…” commits you to naming a case. “Great post” leaves the next sentence with nothing to do.
Teaching centers publish starter sheets for discussion boards. A sheet from the University of Oregon’s Teaching Engagement Program, prepared in spring 2020, offers starters to help you “formulate your thinking when responding to another person’s post.” It lists eight, and every one ends in an open slot: “and I agree with this because…”, “but one possible exception is…”, “and the reason I ask this is because…”. The starter gets the sentence moving. What you write in the slot is the part your classmate can answer and your instructor can grade.
Why do openers like “Great post” lose points?
Discussion rubrics score a reply on what it adds. SNHU’s undergraduate rubric tells students to “demonstrate more depth and thought” than saying things like “I agree” or “You are wrong.” Its engagement row, worth 30 points, gives full marks for “relevant and meaningful response posts with clarifying explanation and detail.” Writing centers tell students the same. MTSU’s University Writing Center says to “move beyond simple agreement or disagreement with the original post” and to “build on the discussion instead.” A handout from Austin Peay’s writing center puts it in one line: “Add new insight rather than repeating what was said.”
A stock opener spends your first sentence, the one your classmate and your instructor read first, on words that could sit under any post. Test yours: imagine it under a different classmate’s post in the same thread. If it still fits, it says nothing about this one.
Some instructors assign a structure that starts with praise. The University of Alaska Southeast’s teaching center lists the 3CQ method, “Compliment, Comment, Connection, Question,” as one possible structure for student responses. If your course uses it, make the compliment specific. Name the detail that worked and say why it worked. That gives your classmate something to answer, and it is closer to the explanation and detail a rubric like SNHU’s asks for.
Sources for this section
- SNHU Undergraduate Discussion Rubric (engagement row, 30 points)
- MTSU University Writing Center: Writing Discussion Posts (handout)
- Austin Peay State University Writing Center: Discussion Boards (handout)
- University of Alaska Southeast, Center for Excellence in Learning and Teaching: At a Glance: Class Discussion Best Practices and Tools (2022)
What are good discussion post reply starters?
Pick the starter after you know what your reply will do. Before you look at the table, write your reaction to the post in a few words of your own: “partly agree, but not on nights,” “I’ve seen the opposite,” “the reading says something else.” Then find the row that matches.
| What your reply does | Starters | What has to come after |
|---|---|---|
| Builds on their idea | “What I’d add to [their idea] is…” or “[Their plan] would go further if…” | The new piece: a step, a case, a number or a source |
| Partly agrees | “I’d keep [the part you accept], but I’m less sure about [the part you question], because…” or “[One part] holds up for me. Where I hesitate is…” | Which part you accept, which part you question, and why |
| Disagrees | “Where I’d draw the line differently is…” or “I read [the evidence] differently, because…” | The exact claim, your reason, and evidence or an example |
| Adds a source | “[Author] ([year]) found that…, which supports your point about…” or “[Author] ([year]) studied [group], so the finding may not carry over to [setting].” | The finding in your words, the part of their claim it touches, and the citation your rubric asks for |
| Connects your experience | “On my unit, [what happened]…” or “At work, I’ve seen…” | What you saw and what it shows about their point, labeled as one setting, with nothing that could identify a patient |
| Offers an exception | “One exception I can think of is…” or “That works in [setting]. I’m less sure about [setting], where…” | The case, and the detail in it that changes the answer |
| Ties in the course | “This week’s reading on [topic] adds a step to [their plan]…” or “[A concept from the reading] helps explain [their example]…” | The reading or concept by name, and how it connects to their post |
| Asks for clarification | “When you say [word], do you mean [one meaning] or [another]?” | Why the answer changes the argument |
| Asks a follow-up question | “How would [their plan] handle [the case you raised]?” or “What happened to [an outcome] after [the change they describe]?” | A question only this classmate can answer, built from the point you made |
| Gives specific praise | “The detail about [X] convinced me, because…” or “[Their example] is the part I’d use at work, because…” | What worked, and why it worked |
Writing two replies this week? Give them different moves, or at least different starters. Your classmates read the whole thread, and the same opening under every post reads like a form letter.
For the disagreement row, the four moves and more phrases to fill:
What does a reply built from starters look like?
In this invented scenario from a nursing informatics course, a classmate proposes replacing the paper whiteboards in patient rooms with digital boards fed by the electronic health record. A first draft built from stock openers might read: “Great post! I agree that digital boards are a good idea. Building on your point, technology is important in nursing. What do you think?” Each sentence would fit under any post in the thread, and “Building on your point” promises an addition that never arrives.
The student’s own reaction, written down before choosing any starter, was “keep the update, worried about the family notes.” The reply below grows from that note, one sentence at a time.
A reply that uses three starters from the table
The classmate wrote (paraphrased): The unit should replace the paper whiteboards in patient rooms with digital boards that update from the electronic health record, so the information on them is always current.
- I’d keep the link to the health record, but I’m less sure the whole board should update itself.Its job: A starter from the “Partly agrees” row, filled with the part of the plan the student accepts and the part she questions. It names the classmate’s idea in her own words, without a compliment first.
- On my clinical unit, the paper board in one room still listed a nurse who had gone home hours earlier.Its job: A starter from the “Connects your experience” row. One thing she saw in one place explains why the automatic update appeals to her, so the agreement has a reason.
- One exception I can think of is the corner where families wrote their questions for the doctor.Its job: A starter from the “Offers an exception” row, close to the University of Oregon sheet’s “one possible exception is…”, filled with a specific case.
- Nurses on that unit read those notes before rounds, and a board fed only by the record would have no space for them.Its job: No starter here. This sentence gives the reason and says what the exception changes for the classmate’s plan.
- How would your design keep a space that families can still write on by hand?Its job: A follow-up question built from the exception. It asks how, so the classmate has a design choice to explain.
Once the reply is written, read each starter again. “One exception I can think of is” keeps its place, because it marks the turn from what the student accepts to what she questions. If a starter only delays the point, delete it and begin the sentence with the idea itself.
The scenario, the classmate and the clinical experience in this reply are invented for this guide. In your own reply, use what you saw yourself, and leave out anything that could identify a patient.
Twelve more full replies, each with a note on what it adds:
How do you use a reply starter without sounding generic?
- Write your reaction first, in a few words of your own, before you look at any list of starters.
- Decide what the reply will do, such as partly agree or offer an exception, and pick a starter for that move.
- Fill every bracket with a detail from this classmate’s post, described in your own words.
- Finish the sentence with your reason, your case or your source. This is the part the starter was holding open.
- Imagine your first sentence under another classmate’s post. If it would still fit, make it more specific.
- Try deleting the starter. If the sentence still reads well without it, keep the shorter version.
Then read the reply aloud once. If a phrase sounds like something you would never say to a classmate in person, rewrite it the way you would say it.
To check that the reply adds enough once the opening works:
Which reply openers should you avoid?
| Opener | Why it falls flat | Try instead |
|---|---|---|
| “Great post!” | It fits under any post and says nothing about this one | Name the detail that worked: “The detail about [X] convinced me, because…” |
| “I agree with you.” | SNHU’s rubric asks for more depth and thought than “I agree” | Say which part you agree with, and why |
| “Thank you for sharing.” | It is polite, and it gives your classmate nothing to answer | Start with the idea you are responding to |
| “I really enjoyed reading your post.” | It reports how you felt, not what you think | Say what you would add or question |
| “This made me think.” | It says thinking happened without showing any of it | Write the thought itself |
| “You make a good point.” | The reader has to guess which point | Name the point in your own words |
| “Building on your point…” with nothing new after it | The starter promises an addition the reply never makes | Make sure the next words are new: a case, a source or a question |
Starters can go wrong in a few other ways. Two stacked at the start (“Building on your point, I agree that…”) make the reader wait twice. A long quotation from the post repeats what everyone in the thread has already read, so describe the idea in your own words. A question your classmate can answer with yes or no often gets just that, so ask how or what.
Wrote your reply? Run it through PeerReply’s rubric check with “Reply to a classmate” selected. It flags a first sentence that opens with a greeting, praise or agreement, such as “Great post” or “I agree”, points out stock phrases such as “thank you for sharing”, and checks the draft you wrote against one of its built-in rubrics. One check a day, no sign-up. Use it only if your course allows AI feedback.
Check my replyCourse rules apply to any writing tool. Permission to use a grammar or feedback tool does not automatically cover AI drafting, and some courses require you to disclose the help. Check your syllabus before you use one.
Frequently asked questions
How do you start a reply to a classmate’s discussion post?
Open with the specific idea you are answering and your stance on it, then give your reason. A starter such as “I’d keep [one part], but I’m less sure about [another], because…” does both. Skip openers like “Great post” that would fit under any classmate’s post.
What can I say instead of “I agree” in a discussion post?
Say which part you agree with and why, for example: “The detail about the night shift convinced me, because…” If you agree with all of it, add what the post lacks, such as a source, a case from work or a specific question.
Is it okay to use sentence starters in a discussion reply?
Yes. Teaching centers, the University of Oregon’s among them, publish starters for discussion boards. Fill each one with a detail from the post and finish it with your own reason. If the sentence reads well without the starter, cut it.
How do you start a reply when you disagree with a classmate?
Say what you accept first, then name the exact claim you question: “Where I’d draw the line differently is…” Give a reason or a source, and end with a question your classmate can answer. Aim the disagreement at the idea, never at the person.
What is the 3CQ method for discussion replies?
3CQ stands for Compliment, Comment, Connection, Question, a reply structure some instructors assign. If your course uses it, make the compliment specific: name the detail that worked and say why. A bare “Great post” gives your classmate nothing to answer.