Skip to content
PeerReply

How to find peer-reviewed sources for discussion posts

Maintained by Maksym Shevchuk, who runs PeerReply. Drafted with AI from the sources linked on this page. Updated .

To find a peer-reviewed source for a discussion post, search a library database or PubMed for the exact claim you want to support. Then check that the journal reviews its articles, that the article reports research or a review, and that it says what your sentence says. A DOI shows only that the article was published.

What is a peer-reviewed source?

A peer-reviewed source is an article that experts in the same field evaluated before a journal published it. Review happens at the journal, so there are two things to ask: does this journal review what it prints, and did this particular piece go through that review?

The second question catches people out. A library guide at the University of Denver says that usually only articles reporting new research findings, plus scholarly reviews of the research, go through peer review. Letters to the editor, book reviews, news and comments do not. So a peer-reviewed journal can still print things your rubric would not accept.

Your assignment may already define the term, with a date range, a source count or a required database. If so, follow that. If it only says “scholarly” or “peer-reviewed,” the checks below are a sensible way to meet it, and your instructor or a librarian can settle anything unclear.

Sources for this section

How do you find a peer-reviewed source for a discussion post?

Start with the sentence you want to support. “Hourly rounding” is a topic and tells a database nothing. “Hourly rounding reduces falls” is a claim, and it tells you what the source has to contain.

  1. Write the claim as one sentence: who it applies to, what is done, what result you expect. For example, patients on hospital units, hourly rounding, falls.
  2. Pull out the key terms and add the other words authors may use. A paper may call the same practice “purposeful nursing rounds,” so try both phrases.
  3. Search where your course expects it. Your school’s library database is the safe default, and PubMed is free and covers health topics. Begin with a short search, because adding every term at once can return nothing.
  4. Narrow the list. PubMed lets you limit by publication date (1, 5 or 10 years, or a custom range) and by article type, such as Review, Clinical Trial or Systematic Review. The “Free full text” filter shows papers you can open without a login. The default sort is Best Match, so read past the first few results.
  5. Check the journal and the article type (the next section shows how) and drop anything that fails.
  6. Read before you cite: the abstract first, then the parts of the full text that cover your claim, usually the results and the limitations.
  7. Write the sentence your source can support, and cite it the way your rubric asks.

If a search returns almost nothing, loosen it: drop the outcome word, widen the patient group, or find a review article on the topic and read the studies it cites. If you get hundreds of results, add the setting or the outcome.

Sources for this section

How can you tell whether an article is peer reviewed?

Several signals look like proof and are not. The table sets out what each one tells you and what it leaves open.

SignalWhat it can showWhat it cannot show
The article has a DOIThe item was registered and published, and the link will keep resolving. Crossref says a DOI itself “is therefore not a mark of quality or endorsement.”That anyone reviewed it, or that it supports your sentence
The article is in PubMedNLM indexed it. Most journals indexed for PubMed are peer reviewed or refereed, according to NLM.NLM keeps no list of peer-reviewed journals and a PubMed search cannot be limited to them. Preprints appear too, with a note that they are not yet peer reviewed.
Your library database has a peer-reviewed filter or tagA quick way to shorten a long listEvery journal. One library guide notes that the database it describes does not include all journals.
The journal’s author instructions or editorial policy describe peer reviewHow the journal handles submissions. This is the most direct check.Whether a particular letter, comment or news item went through it
The journal has the referee icon in UlrichswebThat the journal is listed as refereed, which library guides treat as peer reviewedAnything about the specific article. Search by journal title, not article title, and expect to need library access.
The article reports research or reviews researchThe kind of piece that usually goes through reviewThat it is relevant to your claim
What common signals show about an article, with the source for each.

In practice, look at the journal’s own page for its review process, then at the article type, then at whether PubMed or the publisher marks the paper as a preprint or a retraction. PubMed flags retracted articles and links to the journal’s notice, which is where the reason usually appears. Some notices are only a line or two, so read the notice itself.

Sources for this section

What does choosing a source look like for a nursing discussion post?

The classroom scenario below is invented. The articles are real, and the details come from their PubMed records and, for Morris, its free full text, all checked on 2 November 2026. Use it to see how sources get handled. It is not clinical guidance on rounding.

A classmate posts that hourly rounding prevents patient falls on a hospital unit. You want a source for or against that, so you search for hourly rounding, falls and review.

A search on falls turns up a 2024 paper in the Journal of Patient Safety, “Visitor Restrictions During the COVID-19 Pandemic and Increased Falls With Harm at a Canadian Hospital: An Exploratory Study.” It is about falls and it is a real study, but it looks at visitor restrictions and never tests rounding. It can’t support the classmate’s sentence, so it goes.

Two reviews fit. Mitchell and colleagues (2014) reviewed hourly rounding programs in the Journal of Nursing Administration. Their abstract says results were measured too inconsistently to combine, and that there is moderate-strength evidence the programs reduce patient falls and call light use. Morris and colleagues (2022) reviewed interventions to reduce falls in hospitals in Age and Ageing. Their abstract never mentions rounding. The relevant sentence sits in the full text, under system-based interventions: hourly rounding, bedside handover, electronic surveillance or a patient safety officer “did not significantly reduce the rate of hospital falls in five studies.” The review grouped those interventions, and the nine system-based studies were not pooled. The five citations behind that sentence include one hourly rounding study, from 2014, so the finding is not about rounding alone.

Stop at the abstracts and you cite only the supportive review. The full text turned up a second, less favorable finding on the same sentence. Here is a reply that uses both and goes no further than either one does.

Example 1 · Hourly rounding and falls

129 words

The classmate wrote (paraphrased): Hourly rounding prevents patient falls on a hospital unit.

Falls are a good reason to round, and one review backs you. Mitchell et al. (2014) found moderate-strength evidence that hourly rounding programs reduce patient falls and call light use, though the studies measured results too inconsistently to combine. A 2022 review of hospital falls interventions is less encouraging. Morris et al. (2022) reported that hourly rounding, bedside handover, electronic surveillance or a patient safety officer did not significantly reduce the fall rate in five studies, and the studies were not pooled. That sentence groups four interventions, so I can’t tell how much of it concerns rounding alone, and I haven’t compared which studies each review included. If you tracked one outcome after starting hourly rounding on your unit, would it be falls, call light use, or something else?

Why it works: The reply says what each review found and stops there. It writes “moderate-strength” where a careless draft would write “proves,” keeps the 2022 caveat that the studies were not pooled, and admits the grouped finding and the study overlap are unchecked. The closing question comes straight from the gap between the two reviews.

Sources for this section

How much of the article do you need to read before citing it?

Read enough to defend the sentence you wrote. For a claim about what a study found, that usually means the abstract plus the part of the results that covers your point. The Morris review shows the risk of stopping at the abstract: it has to summarize the whole paper, so a finding on one narrow topic can be left out.

As you read, ask four things. Who or what was studied, and does it match the group in your claim? How large and how certain is the finding? (“Moderate-strength evidence” and “significantly reduced” are different claims.) How old is the paper, and has a newer one answered the same question? What do the authors say they could not show? Then write your sentence to match, and quote or paraphrase only what you saw.

A paywall is annoying but rarely final. Try PubMed’s “Free full text” filter, your library’s access, or a different paper on the same question. If all you can read is an abstract, say only what the abstract says.

What mistakes lead to a weak source in a discussion post?

  • Treating a resolving DOI as proof of quality. It shows the paper exists. Whether it was reviewed, whether it is relevant and whether it is right are separate questions.
  • Citing from the title. A title can match your topic while the study tests something else, as the visitor-restriction paper does.
  • Overstating the finding. If the authors found “moderate-strength evidence,” write that, not “proved.”
  • Picking the one result that agrees with you. If two reviews conflict, report both or say why you chose one.
  • Using an editorial, comment or news item. These can sit inside a peer-reviewed journal without having been reviewed.
  • Citing a preprint or a retracted article. Check for the preprint panel and the retraction banner before you rely on a paper.
  • Citing a source a writing tool suggested without opening it. Look up every reference yourself before you post.
  • Putting patient details in a clinical example. Leave out anything that could identify a patient.

Course rules cover sources as well as wording. If you use a writing or search tool, check what your course allows and disclose the help when it is required.

PeerReply searches PubMed and Crossref for journal articles from the last five years, keeps only the ones whose DOI resolves, and cites no other source. It works from abstracts and does not judge quality, so you still check the journal and read the paper. You get one free reply a day with no sign-up. Use the drafting only if your course allows it.

Draft with source search
Sources for this section

Frequently asked questions

How do I know if an article is peer reviewed?

Read the journal’s author instructions or peer review policy on its website, or look the journal up in Ulrichsweb through your library. Then confirm the article is research or a review, not a letter, comment or news item.

Is every article in PubMed peer reviewed?

No. NLM keeps no list of peer-reviewed journals, and a PubMed search cannot be limited to them. Most indexed journals are peer reviewed, but standards vary, and preprints appear with a note that they are not peer reviewed yet.

Does a DOI mean an article is peer reviewed?

No. Crossref says a DOI is not a mark of quality or endorsement. Use it to find and cite the exact paper, then check the journal’s review process separately.

How many sources do I need in a discussion post?

Your rubric decides. Some ask for at least one citation in replies, others only where you use a source. One relevant source you have read and reported accurately beats several you skimmed.

Can I cite an article if I only read the abstract?

Only for what the abstract says, and it can leave out findings that matter to your point. Open the full text when you can, through a free full text filter or your library, and cite only what you saw.